L6219DSTR-T
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO REQUIRES 10V TO 45V VBB SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Technology | Power MOSFET |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6219 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Qualification Status | Not Qualified |
| Output Voltage | 45V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 750mA |
| Voltage - Load | 10V~45V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6219DSTR-T Overview
This package is designed to work with [0].24-SOIC (0.295, 7.50mm Width)cases are included with the part.A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to General Purpose.Drivers controllers is capable of supplying 4.75V~5.25V volts.The operating temperature ranges from -20°C~150°C TJto -20°C~150°C TJ.The motor type can be classified as Brushed DC.A total of 24terminations are available in this part.A voltage of 10V~45Vcan be applied to the load.You should run this amplifier at 5V.There is Surface Mount recommended mounting method for this device.Maintain the current output of the part at 750mA volts.In this device, the analog IC STEPPER MOTOR CONTROLLERis employed.Drivers controllers is based on the L6219 part number.24pins are present on the device.The Motion Control Electronicsseries contains it.Drivers controllers is maintained at 45V volts.There is also a characteristic ALSO REQUIRES 10V TO 45V VBB SUPPLYassociated with it.
L6219DSTR-T Features
Applications : General Purpose
Load voltage across the chip 10V~45V
base on L6219 number
Additional Feature: ALSO REQUIRES 10V TO 45V VBB SUPPLY
L6219DSTR-T Applications
There are a lot of Allegro MicroSystems L6219DSTR-T motor drivers applications.
- Architectural lighting
- Telltale lights
- Brake lights
- Smart lighting applications
- Handheld devices
- Commercial office
- High brightness LED lighting
- Matrix LED dimmers
- Automotive applications
- Industrial lighting
