L6219R
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Additional Feature | CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L6219 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 30V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 500mA |
| Logic Function | AND |
| Supply Current-Max (Isup) | 60mA |
| Voltage - Load | 4.5V~10V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L6219R Overview
Drivers controllers is designed with Tube package.The part is packaged in a 24-SOIC (0.295, 7.50mm Width) case.To mount the part by [0], it is recommended that you do so.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.4.75V~5.25V volts can be supplied by the device.The operating temperature ranges from -20°C~150°C TJto -20°C~150°C TJ.The motor type can be classified as Brushed DC.A total of 24terminations are available in this part.The voltage can applied to the load at the rate of 4.5V~10V.Drivers controllers is important to remember that this amplifier should be run at 5V.Surface Mountis its recommended mounting method.Keep the part output current at 500mA.The device utilizes the IC STEPPER MOTOR CONTROLLERwhich is an analog IC.The L6219part number is used to locate the part.24pins are used in its design.The Motion Control Electronicsseries includes this item.The supply voltage for this driver is 30V.The characteristic of CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLYis also present.
L6219R Features
Applications : General Purpose
Load voltage across the chip 4.5V~10V
base on L6219 number
Additional Feature: CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLY
L6219R Applications
There are a lot of STMicroelectronics L6219R motor drivers applications.
- Emergency lighting
- Mobile phone display backlight and key light driving
- Automotive applications
- Building technology
- Turn signals
- Telltale lights
- LED ballasts
- Daytime running lights (DRLs)
- Fog lamps
- Indicator circuit
