L6219R013TR
| Parameters | |
|---|---|
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L6219 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Operating Supply Voltage | 30V |
| Supply Voltage-Max (Vsup) | 5.25V |
| Power Supplies | 4.55V |
| Supply Voltage-Min (Vsup) | 4.75V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 500mA |
| Voltage - Load | 4.5V~10V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height Seated (Max) | 2.65mm |
| Length | 15.4mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -20°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3/e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | TIN/NICKEL PALLADIUM GOLD |
| Applications | General Purpose |
| Additional Feature | CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLY |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
L6219R013TR Overview
The package contains [0].The part is packaged in a 24-SOIC (0.295, 7.50mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.I believe it is suitable for the component connected to General Purpose.4.75V~5.25V volts can be supplied by the device.With regard to operating temperature, it ranges -20°C~150°C TJ. Drivers controllers is possible to categorize the motor type as Brushed DC.A total of 24terminations are available in the part.The voltage can applied to the load at the rate of 4.5V~10V.Drivers controllers is very important to keep in mind that this amplifier should be operated at 5V.Ideally, it should be mounted in the Surface Mountposition.Set the part's output current to 500mA.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.L6219is the part number that finds it.24pins are used in its design.The item belongs to the Motion Control Electronics series.A voltage of 30V is used as the supply voltage for this driver.Drivers controllers is also characterized by CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLY.
L6219R013TR Features
Applications : General Purpose
Load voltage across the chip 4.5V~10V
base on L6219 number
Additional Feature: CONTROL FOR TWO DC MOTORS; ALSO REQUIRES A 4.5 VOLTS TO 10 VOLTS SUPPLY
L6219R013TR Applications
There are a lot of STMicroelectronics L6219R013TR motor drivers applications.
- Camera-enabled smartphones
- Scanning equipment
- Tail lights
- Landscape lighting
- CHMSL (center high-mount stop lamps)
- Charge pump circuits
- Lighting for the ambience of tunability
- Alternative to HID lights
- parking lights
- Smart lighting applications
