L6225DTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 266.712314mg |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 48V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6225 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Operating Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6225DTR Overview
Drivers controllers includes a Tape & Reel (TR)package.This part is packed in a 20-SOIC (0.295, 7.50mm Width) case.Mounting the part by Surface Mountis recommended.As a result, it is appropriate for the component connected to General Purpose.8V~52V volts can be supplied by the device.Drivers controllers operates wDrivers controllershin a range of -25°C~125°C TJdegrees Celsius.Motors can be classified as Brushed DC.There are 20 terminations available on this part.A voltage of 8V~52Vcan be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 48V.There is a recommended mounting method of Surface Mount.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.The L6225part number is used to locate the part.20 pins are provided for its design.Drivers controllers belongs to Motion Control Electronics series.4outputs are available.Drivers controllers operates from a voltage of 48V volts.A constant voltage is maintained at 52V.STSPIN L62 is the main series of the part.Drivers controllers is possible to recognize the motor type as [0].For the purposes of meeting its operation requirements, the maximum output current reaches [0].Controller ic uses 10mAas the supply current for Controller ics operation.
L6225DTR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6225 number
designed with 4 outputs
Motor Type classified as Brushed
L6225DTR Applications
There are a lot of STMicroelectronics L6225DTR motor drivers applications.
- drivers for outdoor application
- Telltale lights
- Outdoor area lights
- Commercial office
- LED ballasts
- Multiple output capability
- Dash
- Fog lamps
- Hidden coves in high-end residential settings
- AM radio
