L6225N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Weight | 2.259996g |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Supply Voltage | 48V |
| Base Part Number | L6225 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Operating Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 4.59mm |
| Length | 24.8mm |
| Width | 7.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6225N Overview
The package contains [0].The part is packaged in a 20-DIP (0.300, 7.62mm) case.The part should be mounted by Through Hole.The component connected in General Purposematches it perfectly.Drivers controllers is capable of supplying 8V~52V volts.Regarding the operating temperature, it is in the range of -25°C~125°C TJ°C.The motor type can be classified as Brushed DC.In this part, there are 20 terminations available.Voltage can be applied at a rate of 8V~52V volts to the load.Please take in mind that this amplifier should be run at 48V.Through Holeis its recommended mounting method.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in the device.The L6225part number is used to locate the part.There are 20 pins on it.In the Motion Control Electronicsseries, it is included.Drivers controllers is possible to access 4outputs.The driver is powered by a 48Vvolt supply.In this case, STSPIN L62is maintained as the output voltage.Brushedrepresents the motor type.For the purposes of meeting its operation requirements, the maximum output current reaches [0].In order to operate it, 10mAsupply current is used.Controller ic has 2channels.
L6225N Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6225 number
designed with 4 outputs
Motor Type classified as Brushed
L6225N Applications
There are a lot of STMicroelectronics L6225N motor drivers applications.
- Dome
- A cross between entertainment
- Arena lighting
- Building technology
- Display LED backlighting
- Hospitality buildings
- Daytime running lights (DRLs)
- Emergency lighting
- Lighting for health and wellbeing
- Alternative to HID lights
