L6225PD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 48V |
| Base Part Number | L6225 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 2 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 4A |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6225PD Overview
The design includes a package of type [0].A 20-SOIC (0.433, 11.00mm Width) Exposed Padcase is included with the part.To mount the part by [0], it is recommended that you do so.As a result, it is appropriate for the component connected to General Purpose.A device with a voltage range of 8V~52V volts is available.With regard to operating temperature, it ranges -25°C~125°C TJ. Drivers controllers is possible to categorize the motor type as Brushed DC.There are 20 terminations available on this part.There is the option of applying the voltage to the load at the rate of 8V~52V.In order to get the best performance from this amplifier, it should be run at 48V.A Surface Mountmounting method is recommended for this product.Keep the part output current at 4A.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is employed in this device.The part number L6225indicates that it is found.A device with 20pins is available.Drivers controllers belongs to the Motion Control Electronics series.There are 4 outputs available.There is 48V supply voltage required for this driver.The output voltage is maintained at 52V.STSPIN L62 is the main series of the part.Drivers controllers is possible to recognize Brushedas the type of motor.As a result, the maximum output current reaches 2.8Ain order to meet the requirements of the operation.There are 2 channels on it.
L6225PD Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6225 number
designed with 4 outputs
Motor Type classified as Brushed
L6225PD Applications
There are a lot of STMicroelectronics L6225PD motor drivers applications.
- Arena lighting
- Display LED backlighting
- A cross between entertainment
- Industrial high-bay lights
- Monitoring the energy that the luminaire uses
- Building technology
- Lighting for the ambience of tunability
- Camcorders
- Home lighting systems
- LED bias
