L6225PDTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 48V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L6225 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Max (Vsup) | 52V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 1.4A |
| Voltage - Load | 8V~52V |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6225PDTR Overview
This package was designed with Tape & Reel (TR)in mind.A 20-SOIC (0.433, 11.00mm Width) Exposed Padcase is included with the part.Mounting the part by Surface Mountis recommended.The component connected in General Purposeis compatible with it.In this case, the device can supply 8V~52V volts.A range of -25°C~125°C TJis available for operating temperature.The motor type can be classified as Brushed DC.This part provides 20terminations.You can apply voltage at 8V~52Vto the load.Please take in mind that this amplifier should be run at 48V.Ideally, it should be mounted in the Surface Mountposition.The device utilizes the IC BRUSHLESS DC MOTOR CONTROLLERwhich is an analog IC.The part number L6225indicates that it is found.In this device, there are 20 pins.Drivers controllers belongs to Motion Control Electronics series.Currently, there are 4 outputs available.There is 48V supply voltage required for this driver.STSPIN L62 is the main series of the part.In order to achieve the operation requirements, the maximal output current reaches [0].
L6225PDTR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6225 number
designed with 4 outputs
L6225PDTR Applications
There are a lot of STMicroelectronics L6225PDTR motor drivers applications.
- Alternative to HID lights
- parking lights
- PWM generators
- General lighting
- Side marker lights
- High power LED street light
- Human-centric lighting
- Large outdoor LED display
- High brightness LED lighting
- Hazardous application
