L6226D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 48V |
| Terminal Pitch | 1.27mm |
| Base Part Number | L6226 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6226D Overview
Drivers controllers is designed wDrivers controllersh a package of [0].Parts are packaged in 24-SOIC (0.295, 7.50mm Width)cases.The part should be mounted by Surface Mount.In this case, it is appropriate for the component connected to General Purpose.There is a possibility of providing 8V~52Vvolts through the device.This device operates at a temperature of -25°C~125°C TJ.The motor type can be classified as Brushed DC.A total of 24terminations are available in the part.Drivers controllers is possible to apply voltage at a rate of 8V~52Vto the load.Drivers controllers is important to note that this amplifier should be operated at the 48Vsetting.The recommended mounting method is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog IC is employed in this device.Based on the L6226part number, it is found.24pins are used in its design.The item belongs to the Motion Control Electronics series.Drivers controllers is possible to access 4outputs.The driver operates from a supply voltage of 48V volts.Continually maintains the output voltage at 52V.STSPIN L62is maintained as the output voltage.0 indicates that the motor type is [0].In order to achieve the operation requirements, the maximal output current reaches [0].
L6226D Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6226 number
designed with 4 outputs
Motor Type classified as Brushed
L6226D Applications
There are a lot of STMicroelectronics L6226D motor drivers applications.
- General lighting
- Turn signals
- Monitoring the energy that the luminaire uses
- Industrial high-bay lights
- Display LED backlighting
- Horticultural lighting
- LED ballasts
- AM radio
- Accurate LED current matching
- Arena lighting
