L6226PD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Base Part Number | L6226 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 4 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 10mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 4A |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6226PD Overview
The package contains [0].A 36-BSSOP (0.433, 11.00mm Width) Exposed Padcase is included with the part.Ideally, the part should be mounted by Surface Mount.As a result, it is appropriate for the component connected to General Purpose.Drivers controllers is capable of supplying 8V~52V volts.This device operates at a temperature of -25°C~125°C TJ.A Brushed DCmotor can be classified as a type of motor.This part offers 36terminations.Voltage can be applied at a rate of 8V~52V volts to the load.You should run this amplifier at 48V.Its recommended mounting way is Surface Mount.Maintain a 4Aoutput current for the part.An analog IC with the model number BRUSHLESS DC MOTOR CONTROLLERis employed in the device.According to the L6226part number, the part is found.A device with 36pins is available.Drivers controllers belongs to Motion Control Electronics series.Drivers controllers operates from a voltage of 48V volts.At [0], the output voltage is maintained.In this case, the output voltage is maintained at STSPIN L62.Drivers controllers is possible to recognize Brushedas the type of motor.Its maximum output current reaches 2.8Ato meet the operational requirements.There are 4 channels on this device.
L6226PD Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6226 number
Motor Type classified as Brushed
L6226PD Applications
There are a lot of STMicroelectronics L6226PD motor drivers applications.
- LED bias
- PWM generators
- Human-centric lighting
- PDAs
- Indicator
- Architectural lighting
- Telltale lights
- Automotive instrumentation
- Accurate LED current matching
- High power LED street light
