L6226Q
| Parameters | |
|---|---|
| Output Current per Channel | 1.4A |
| Rise Time | 250ns |
| Supply Current-Max (Isup) | 10mA |
| Fall Time (Typ) | 250 ns |
| Turn-Off Delay Time | 1 μs |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Number of Drivers | 2 |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 950μm |
| Length | 5.15mm |
| Width | 5.15mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tray |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | QUAD |
| Supply Voltage | 48V |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz |
| Base Part Number | L6226 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Supply Voltage-Min (Vsup) | 8V |
| Number of Channels | 4 |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Turn On Delay Time | 1.9 μs |
| Logic Function | AND |
L6226Q Overview
The design contains a Traypackage.This part is packed in a 32-VFQFN Exposed Pad case.Surface Mountshould be used for mounting the part.The component connected in General Purposeis compatible with it.The device is capable of supplying a voltage of 8V~52V volts.This device operates at a temperature of -25°C~125°C TJ.A motor of this type can be categorized as Brushed DC.The part supports 32terminations.The voltage can applied to the load at the rate of 8V~52V.The amplifier should be set to 48V.The recommended way to mount it is Surface Mount.A BRUSH DC MOTOR CONTROLLERanalog integrated circuit is used in the device.According to the L6226part number, the part is found.32pins are used in its design.Drivers controllers is maintained at 52V volts.Continually maintains the output voltage at STSPIN L62.Drivers controllers is possible to recognize the motor type as [0].Its maximum output current reaches 2.8Ato meet the operational requirements.There are 4 channels on this device.This frequency can be achieved at 100kHz.Controller ic is equipped wController ich 2 drivers.
L6226Q Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6226 number
Motor Type classified as Brushed
with 2 Drivers
L6226Q Applications
There are a lot of STMicroelectronics L6226Q motor drivers applications.
- Landscape lighting
- Mobile phone display backlight and key light driving
- Home lighting systems
- Footwell lighting
- High brightness LED lighting
- A cross between entertainment
- Automotive applications
- Display LED backlighting
- General lighting
- Camera-enabled smartphones
