L6226QTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | QUAD |
| Supply Voltage | 48V |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz |
| Base Part Number | L6226 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.4A |
| Turn On Delay Time | 1.9 μs |
| Logic Function | AND |
| Rise Time | 250ns |
| Supply Current-Max (Isup) | 10mA |
| Fall Time (Typ) | 250 ns |
| Turn-Off Delay Time | 1 μs |
| Voltage - Load | 8V~52V |
| Number of Drivers | 2 |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 0.95mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6226QTR Overview
Drivers controllers includes a Tape & Reel (TR)package.Drivers controllers comes in a 32-VFQFN Exposed Pad case.In general, it is recommended that the part be mounted by Surface Mount.I believe it would be suitable for the component connected to General Purpose.Drivers controllers is capable of supplying 8V~52V volts.Regarding the operating temperature, it is in the range of -25°C~125°C TJ°C.A Brushed DCmotor can be classified as a type of motor.This part offers 32terminations.At a rate of [0], voltage can be applied to the load.The amplifier should be set to 48V.Ideally, it should be mounted in the Surface Mountposition.Drivers controllers is recommended to keep the part output current at 1.4A.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.The part number L6226indicates that it is found.32pins are available on the device.Currently, there are 4 outputs available.In this case, the output voltage is kept at 52V volts.STSPIN L62is maintained as the output voltage.For the purposes of meeting its operation requirements, the maximum output current reaches [0].Controller ic is possible to achieve a frequency of 100kHz.There are 2drivers installed in it.
L6226QTR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6226 number
designed with 4 outputs
with 2 Drivers
L6226QTR Applications
There are a lot of STMicroelectronics L6226QTR motor drivers applications.
- Home lighting systems
- Multiple output capability
- Hazardous application
- Accurate LED current matching
- Brake lights
- Handheld devices
- AM radio
- Indicator
- Architectural lighting
- Mobile phone display backlight and key light driving
