L6227D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 48V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6227 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 1.4A |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6227D Overview
There is a Tubepackage included in the design.This part is packaged with a case of [0].A mounting position of Surface Mountis recommended for the part.As a result, it is appropriate for the component connected to General Purpose.Drivers controllers is capable of supplying 8V~52V volts.Operation temperature ranges from -25°C~125°C TJ.There is a motor type Brushed DCavailable.This part offers 24terminations.The voltage can applied to the load at the rate of 8V~52V.Drivers controllers is important to note that this amplifier should be operated at the 48Vsetting.The recommended mounting method is Surface Mount.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.According to the L6227part number, the part is found.24 pins are provided for its design.The Motion Control Electronicsseries contains it.There are 4 outputs available.A supply voltage of 48V is required for the operation of this driver.The output voltage is maintained at 52V.At [0], the output voltage is maintained.Brushedrepresents the motor type.Its maximal output current reaches 2.8A to meet the operation requirements.
L6227D Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6227 number
designed with 4 outputs
Motor Type classified as Brushed
L6227D Applications
There are a lot of STMicroelectronics L6227D motor drivers applications.
- Camcorders
- A cross between entertainment
- Automotive applications
- Display LED backlighting
- Camera-enabled smartphones
- CHMSL (center high-mount stop lamps)
- Large format LED backlighting
- Handheld devices
- Indicator circuit
- Outdoor area lights
