L6227N
| Parameters | |
|---|---|
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 3.3mm |
| Length | 31.75mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-PowerDIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 3.740011g |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Supply Voltage | 48V |
| Base Part Number | L6227 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Operating Supply Current | 1.4A |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Motor Type | Brushed |
L6227N Overview
The design includes a package of type [0].The part is packged with 24-PowerDIP (0.300, 7.62mm) case.In general, it is recommended that the part be mounted by Through Hole.The component connected in General Purposematches it perfectly.Drivers controllers is capable of supplying 8V~52V volts.Operation temperature ranges from -25°C~125°C TJ.Motors can be classified as Brushed DC.There are 24 terminations available on this part.A voltage of 8V~52Vcan be applied to the load.The amplifier should be set to 48V.There is Through Hole recommended mounting method for this device.A STEPPER MOTOR CONTROLLERanalog integrated circuit is used in the device.Drivers controllers is based on the L6227 part number.This device is designed with a pin count of 24.The item belongs to the Motion Control Electronics series.The available outputs are [0].The driver is powered by a 48Vvolt supply.Continually maintains the output voltage at 52V.In this case, the output voltage is maintained at STSPIN L62.Drivers controllers is possible to recognize Brushedas the type of motor.In order to satisfy the requirements of operation, the maximum output current reaches [0].Controller ic uses 1.4Aas the supply current for Controller ics operation.
L6227N Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6227 number
designed with 4 outputs
Motor Type classified as Brushed
L6227N Applications
There are a lot of STMicroelectronics L6227N motor drivers applications.
- Arena lighting
- Street lights
- High brightness LED lighting
- Mobile phone display backlight and key light driving
- Hospitality buildings
- Indicator
- Dome
- Indicator circuit
- A cross between entertainment
- Accurate LED current matching
