L6227PD
| Parameters | |
|---|---|
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | STEPPER MOTOR CONTROLLER |
| Nominal Supply Current | 1.4A |
| Output Configuration | Half Bridge (4) |
| Output Current per Channel | 1.4A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushed |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6227 |
| Function | Driver - Fully Integrated, Control and Power Stage |
L6227PD Overview
The package is designed with [0].This part is packaged with a case of [0].Drivers controllers is recommended to mount the part by Surface Mount.The component connected in General Purposematches it perfectly.Drivers controllers is capable of supplying 8V~52V volts.A range of -25°C~125°C TJis available for operating temperature.A Brushed DCmotor can be classified as a type of motor.There are 36 terminations available in the part.A voltage of 8V~52Vcan be applied to the load.Drivers controllers is very important to keep in mind that this amplifier should be operated at 48V.The recommended mounting method is Surface Mount.This device utilizes the STEPPER MOTOR CONTROLLERanalog integrated circuit.Based on the L6227part number, it is found.36pins are used in its design.Drivers controllers is a part of the Motion Control Electronics series.4outputs are available in total.A supply voltage of 48V is required for the operation of this driver.In this case, the output voltage is maintained at 52V.In this case, STSPIN L62is maintained as the output voltage.The motor type can be identified as Brushed.For the purposes of meeting its operation requirements, the maximum output current reaches [0].
L6227PD Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6227 number
designed with 4 outputs
Motor Type classified as Brushed
L6227PD Applications
There are a lot of STMicroelectronics L6227PD motor drivers applications.
- Digital still cameras
- Industrial high-bay lights
- High power LED street light
- Architectural lighting
- Automotive applications
- Daytime running lights (DRLs)
- Running preventive- maintenance diagnostics
- Hidden coves in high-end residential settings
- Indicator
- LED bias
