L6227Q
| Parameters | |
|---|---|
| Voltage - Load | 8V~52V |
| Number of Drivers | 2 |
| Motor Type - AC, DC | Brushed DC |
| Motor Type - Stepper | Bipolar |
| Height Seated (Max) | 0.95mm |
| Length | 5mm |
| Width | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tray |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Resistance | 730mOhm |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.5mm |
| Frequency | 100kHz |
| Base Part Number | L6227 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSH DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (4) |
| Propagation Delay | 500 ns |
| Turn On Delay Time | 1.9 μs |
| Logic Function | AND |
| Output Current per Channel | 1.4A |
| Rise Time | 250ns |
| Supply Current-Max (Isup) | 10mA |
| Fall Time (Typ) | 250 ns |
| Turn-Off Delay Time | 1 μs |
L6227Q Overview
Drivers controllers is designed wDrivers controllersh a package of [0].There is 32-VFQFN Exposed Pad case included with the part.Ideally, the part should be mounted by Surface Mount.Fits the component connected to General Purpose.A device with a voltage range of 8V~52V volts is available.Drivers controllers operates wDrivers controllershin a range of -25°C~125°C TJdegrees Celsius.A Brushed DCmotor can be classified as a type of motor.A total of 32terminations are available in the part.If the voltage is applied to the load at the rate of [0], the load will be affected.You should run this amplifier at 48V.There is Surface Mount recommended mounting method for this device.In this device, the analog IC BRUSH DC MOTOR CONTROLLERis employed.Based on the L6227part number, it is found.A device with 32pins is available.The Motion Control Electronicsseries includes this item.There are 4 outputs available.52Vis maintained as the output voltage.There is STSPIN L62 change in the output voltage.Its maximal output current reaches 2.8A to meet the operation requirements.In this case, the frequency is 100kHz.The device is equipped with 2 drivers.
L6227Q Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6227 number
designed with 4 outputs
with 2 Drivers
L6227Q Applications
There are a lot of STMicroelectronics L6227Q motor drivers applications.
- Lighting for health and wellbeing
- Brake lights
- Tunnel lights
- Telltale lights
- Infotainment backlighting
- Running preventive- maintenance diagnostics
- Charge pump circuits
- Automotive exterior and interior lighting
- Hospitality buildings
- Street lights
