L6228D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Weight | 307.790773mg |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 48V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6228 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 4 |
| Output Voltage | 52V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Operating Supply Current | 1.4A |
| Output Configuration | Half Bridge (4) |
| Output Current-Max | 2.8A |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 8V~52V |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6228D Overview
This package is designed to work with [0].A 24-SOIC (0.295, 7.50mm Width)case is included with the part.The part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.There is a possibility of providing 8V~52Vvolts through the device.There is a temperature range of -25°C~125°C TJin which this device operates.The part supports 24terminations.At a rate of [0], voltage can be applied to the load.You should run this amplifier at 48V.In terms of mounting, it is recommended that it be mounted in Surface Mount.This can be determined by looking at the L6228 part number.Drivers controllers is designed wDrivers controllersh 24 pins.Drivers controllers belongs to the Motion Control Electronics series.There are a total of 4outputs available.A voltage of 52Vis maintained at the output.In this case, the output voltage is kept at STSPIN L62 volts.A motor type of Steppercan be recognized.Controller ic operates wController ich a supply current of 1.4A.
L6228D Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6228 number
designed with 4 outputs
Motor Type classified as Stepper
L6228D Applications
There are a lot of STMicroelectronics L6228D motor drivers applications.
- Camera-enabled smartphones
- Daytime running lights (DRLs)
- Footwell lighting
- Infotainment backlighting
- Multiple output capability
- Display LED backlighting
- Scanning equipment
- Street lights
- Tunnel lights
- PDAs
