L6228DTR
| Parameters | |
|---|---|
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 8V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 48V |
| Base Part Number | L6228 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 52V |
| Operating Supply Voltage | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Nominal Supply Current | 5mA |
| Output Configuration | Half Bridge (4) |
| Current - Output | 1.4A |
| Voltage - Load | 8V~52V |
| Max Junction Temperature (Tj) | 125°C |
| Switching Frequency | 100kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1, 1/2 |
| Height | 2.65mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L62 |
L6228DTR Overview
Drivers controllers is designed with Tape & Reel (TR) package.Drivers controllers is packaged wDrivers controllersh a 24-SOIC (0.295, 7.50mm Width) case.The part should be mounted by Surface Mount.Drivers controllers is fDrivers controllersting for the component connected in General Purpose.The device can supply 8V~52V volts.There is a temperature range of -25°C~125°C TJin which this device operates.There are 24 terminations available on this part.The voltage can applied to the load at the rate of 8V~52V.In order to get the best performance from this amplifier, it should be run at 48V.The recommended mounting method is Surface Mount.Keep the part output current at 1.4A.According to the L6228part number, the part is found.In this device, there are 24 pins.Drivers controllers is a part of the Motion Control Electronics series.Currently, there are 1 outputs available.There is 48V supply voltage required for this driver.In this case, the output voltage is maintained at 52V.Drivers controllers is maintained at a voltage of STSPIN L62.The motor type can be identified as Stepper.
L6228DTR Features
Applications : General Purpose
Load voltage across the chip 8V~52V
base on L6228 number
designed with 1 outputs
Motor Type classified as Stepper
L6228DTR Applications
There are a lot of STMicroelectronics L6228DTR motor drivers applications.
- Landscape lighting
- LED bias
- Large outdoor LED display
- Commercial office
- RGB and monochromatic LED drivers for signage and traffic signals
- PDAs
- Large format LED backlighting
- Architectural lighting
- Horticultural lighting
- A cross between entertainment
