L6229PD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | BiCDMOS |
| Voltage - Supply | 12V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Supply Voltage | 48V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6229 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 52V |
| Max Output Current | 2.8A |
| Power Supplies | 48V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Output Configuration | Half Bridge (3) |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 1.4A |
| Voltage - Load | 12V~52V |
| Switching Frequency | 100kHz |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6229PD Overview
This package is designed to work with [0].The part is packged with 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case.Mounting the part by Surface Mountis recommended.Fits the component connected to General Purpose.A device with a voltage range of 12V~52V volts is available.This device operates at a temperature of -25°C~125°C TJ.There is a motor type Brushless DC (BLDC)available.There are 36 terminations available in the part.A voltage of 12V~52Vcan be applied to the load.Please take in mind that this amplifier should be run at 48V.Its recommended mounting way is Surface Mount.A BRUSHLESS DC MOTOR CONTROLLERanalog integrated circuit is used in the device.The part number L6229indicates that it is found.In this device, there are 36 pins.Drivers controllers belongs to the Motion Control Electronics series.1outputs are available.In this case, 52Vis maintained as the output voltage.There is STSPIN L62 change in the output voltage.This motor type can be recognized as Brushless DC (BLDC).As a result, the maximum output current reaches 2.8Ain order to meet the requirements of the operation.
L6229PD Features
Applications : General Purpose
Load voltage across the chip 12V~52V
base on L6229 number
designed with 1 outputs
Motor Type classified as Brushless DC (BLDC)
L6229PD Applications
There are a lot of STMicroelectronics L6229PD motor drivers applications.
- Automotive applications
- Matrix LED dimmers
- Large outdoor LED display
- Indicator circuit
- Arena lighting
- Footwell lighting
- Tunnel lights
- Telltale lights
- Infotainment backlighting
- Horticultural applications
