L6235D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| Series | STSPIN L62 |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | General Purpose |
| Subcategory | Motion Control Electronics |
| Technology | DMOS |
| Voltage - Supply | 12V~52V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Supply Voltage | 48V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6235 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 3 |
| Output Voltage | 52V |
| Operating Supply Voltage | 42V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | Parallel |
| Analog IC - Other Type | BRUSHLESS DC MOTOR CONTROLLER |
| Nominal Supply Current | 6mA |
| Output Configuration | Half Bridge (3) |
| Output Current-Max | 5.6A |
| Supply Current-Max (Isup) | 10mA |
| Collector Emitter Voltage (VCEO) | 52V |
| Max Collector Current | 2.8A |
| Voltage - Load | 12V~52V |
| Motor Type | Brushless DC (BLDC) |
| Motor Type - AC, DC | Brushless DC (BLDC) |
| Height | 2.35mm |
| Length | 15.6mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6235D Overview
The package is designed with [0].The part is packged with 24-SOIC (0.295, 7.50mm Width) case.Drivers controllers is recommended that the part be mounted by Surface Mount.Fits the component connected to General Purpose.There is a possibility of providing 12V~52Vvolts through the device.Drivers controllers operates wDrivers controllershin a range of -25°C~125°C TJdegrees Celsius.Drivers controllers is possible to categorize the motor type as Brushless DC (BLDC).A total of 24terminations are available in this part.Drivers controllers is possible to apply voltage to the load at the rate of 12V~52V.The amplifier should be set to 48V.Surface Mountis its recommended mounting method.There is an analog integrated circuit BRUSHLESS DC MOTOR CONTROLLERpresent in the device.According to the L6235part number, the part is found.The device has 24 pins.Drivers controllers belongs to the Motion Control Electronics series.Drivers controllers is possible to access 3outputs.The driver operates from a supply voltage of 42V volts.Drivers controllers is maintained at 52V volts.STSPIN L62is maintained as the output voltage.The motor type can be recognized as Brushless DC (BLDC).
L6235D Features
Applications : General Purpose
Load voltage across the chip 12V~52V
base on L6235 number
designed with 3 outputs
Motor Type classified as Brushless DC (BLDC)
L6235D Applications
There are a lot of STMicroelectronics L6235D motor drivers applications.
- Large format LED backlighting
- Horticultural lighting
- Automotive applications
- Architectural lighting
- PDAs
- Camera-enabled smartphones
- Building technology
- Infotainment backlighting
- Arena lighting
- Hospitality buildings
