L6370D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~85°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Max Power Dissipation | 1.5W |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Current Rating | 2.5A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6370 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 2.5A |
| Operating Supply Voltage | 35V |
| Power Supplies | 24V |
| Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Current | 2.5A |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 9.5V |
| Max Input Voltage | 35V |
| Output Current per Channel | 2.5A |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 3.2A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6370D Overview
It is package in Tube case.This package is included in 20-SOIC (0.433, 11.00mm Width) Exposed Pad.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.Ensure reliable operation by setting the temperature to -25°C~85°C TJ.There are 1 outputs available on this lighting driver.In order to operate, it requires a voltage supply of Not Required.Voltage output is N-Channel volts at maximum.A lighting driver with Status Flag features is available.It is a member of the L6370 family.There are 20 terminations in it.The 20 pins are used for the operation of the system.It consists of 1 functions.This operation requires the maximum output current to be decreased to 2.5A.A supply voltage of 24V leads to high efficiency.The LED driving board is mounted in the way of Surface Mount.20 pins are equipped with it.In this case, the output current will be set to 2.5A.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.There is a voltage supply of 24V volts on this part.In order to optimize the efficiency of the supply voltage, it should be set to 35V.It has a maximum input voltage of 35V volts.There is a minimum input voltage of 9.5V volts.For its operation, a current of 20mA is required.
L6370D Features
Supplied from 24V
L6370D Applications
There are a lot of STMicroelectronics L6370D Power Switches ICs applications.
- Various applications equipped with buttons
- USB Power Distribution
- PC Card Hot Swap
- Smart Phones, Feature Phones
- Storage (HDDs, SSDs)
- Telecom and Network Systems
- Portable GPS
- Portable GPS Device
- Wireless/Networking Cards
- Hot Swap
