L6370D013TR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~85°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6370 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.2A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Nominal Supply Current | 20mA |
| Output Configuration | High Side |
| Output Current | 2.5A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 20mA |
| Input Type | Differential |
| Turn On Delay Time | 1.28 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 9.5V |
| Max Input Voltage | 35V |
| Output Current per Channel | 2.5A |
| Nominal Input Voltage | 24V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 3.2A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
L6370D013TR Overview
Tape & Reel (TR) is the way it's packaged.Package 20-SOIC (0.433, 11.00mm Width) Exposed Pad contains it.It has been mounted as Surface Mount on the LED driver.A General Purpose switch type is owned by it.It is recommended to set the temperature to -25°C~85°C TJ in order to ensure reliable operation.There are 1 outputs available on this lighting driver.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.A lighting driver with Status Flag features is available.There is a L6370 family of things that it belongs to.It contains 20 terminations.In order to operate, the 20 pins are used.The LED driving board has a total of 1 functions.It is necessary to reduce the maximum output current to 3.2A to meet the operation criteria.High efficiency is possible when the supply voltage is set to 24V.It is positioned in the direction of Surface Mount.20 pins are connected to it in total.Currently, the LED driving board has a resistance of 100mOhm ohms.This case results in a 2.5A output current.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.In order to maximize efficiency, the supply voltage should be set to 35V.Its maximum input voltage is 35V volts.A voltage of 9.5V volts is the minimum input voltage.This system has a maximum current requirement of 20mA.
L6370D013TR Features
Supplied from 24V
Resistance of 100mOhm
L6370D013TR Applications
There are a lot of STMicroelectronics L6370D013TR Power Switches ICs applications.
- Solid State Drivers
- Gaming
- Portable Devices
- Hot Swap
- HDD and SSD
- Portable GPS Device
- Wearable Devices
- HDD, SSD
- Hard Disk Drives
- Hot-Swap Systems
