L6370QTR
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-VFQFN Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Resistance | 100mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | QUAD |
| Supply Voltage | 24V |
| Terminal Pitch | 0.5mm |
| Base Part Number | L6370 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 3.2A |
| Operating Supply Voltage | 35V |
| Power Supplies | 24V |
| Interface | On/Off |
| Nominal Supply Current | 3mA |
| Output Configuration | High Side |
| Output Current | 2.6A |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Max Supply Current | 4mA |
| Input Type | Differential |
| Switch Type | General Purpose |
| Min Input Voltage | 9.5V |
| Max Input Voltage | 35V |
| Output Current per Channel | 2.5A |
| Nominal Input Voltage | 35V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9.5V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Rds On (Typ) | 100m Ω |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6370QTR Overview
It is packaged in the manner of a Tape & Reel (TR).There is a package for it in the 48-VFQFN Exposed Pad package.This LED driving board is mounted using the mounting type Surface Mount.General Purpose is the type of switch owned by it.Ensure reliable operation by setting the temperature to -25°C~125°C TJ.There is a default setting of 1 for output.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Features of the lighting driver are Status Flag.This object belongs to the L6370 family.In total, there are 48 terminations.The 48 pins are used for the operation of the system.This operation requires the maximum output current to be decreased to 3.2A.As long as the supply voltage is 24V, high efficiency can be achieved.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 100mOhm resistance.It is set to 2.6A in this case.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The power supply of the part is 24V.In order to maximize efficiency, the supply voltage should be set to 35V.The maximum input voltage is 35V volts.A voltage of 9.5V volts is the minimum input voltage.A maximum current requirement of 4mA is required for its operation.
L6370QTR Features
Supplied from 24V
Resistance of 100mOhm
L6370QTR Applications
There are a lot of STMicroelectronics L6370QTR Power Switches ICs applications.
- USB Power Distribution
- Wireless/Networking Cards
- Hot-Swap Systems
- Storage (HDDs, SSDs)
- Solid-State Drives
- Hard Disk Drives
- Set-top-box
- HDD and SSD
- USB Ports/Hubs
- Notebook and Tablet Computers
