L6374FP013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | Line Driver or Receivers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6374 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 1A |
| Supply Voltage-Max (Vsup) | 35V |
| Supply Voltage-Min (Vsup) | 10.8V |
| Interface | On/Off |
| Nominal Supply Current | 5mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Characteristics | TOTEM-POLE |
| Output Current per Channel | 100mA |
| Differential Output | NO |
| Output Polarity | TRUE |
| Ratio - Input:Output | 1:1 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Voltage - Load | 10.8V~35V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, Over Voltage |
| Transmit Delay-Max | 1500 ns |
| Out Swing-Min | 35 V |
| Height Seated (Max) | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L6374FP013TR Overview
It is packaged in the manner of a Tape & Reel (TR).In the 20-SOIC (0.295, 7.50mm Width) package, it is included.The mounting type of the LED driver is Surface Mount.It owns General Purpose switch type.It is recommended that the temperature be set to -25°C~125°C TJ for reliable operation.The lighting driver is equipped with 4 outputs that can be used.The LED driving board is powered by a voltage of Not Required.Voltage output is N-Channel volts at maximum.Features of the lighting driver are Status Flag.It belongs to the family L6374.There are 20 terminations in it.The operation is performed through the 20 pins.There are 4 functions of the LED driver.This results in the maximum output current dropping to 1A to meet the operation criteria.It is possible to obtain high efficiency with a supply voltage of 24V.It is mounted in the way of Surface Mount.There are 20 pins in total on this board.A self-contained LED driver with a capacity of Line Driver or Receivers is contained in an econtainer.This LED driver is configured to have a maximum supply voltage of 35V (Vsup).The supply voltage (Vsup) should be kept above 10.8V for normal operation.
L6374FP013TR Features
Supplied from 24V
L6374FP013TR Applications
There are a lot of STMicroelectronics L6374FP013TR Power Switches ICs applications.
- USB Power Distribution
- Hot Swap
- USB3.1 Power Delivery
- Solid-State Drives
- PC Card Hot Swap
- Telecom and Network Systems
- Smartphone and PDA
- USB Ports/Hubs
- Notebook and Tablet Computers
- Wearable Devices
