L6375D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Current Rating | 1.1A |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6375 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Supply Voltage-Max (Vsup) | 35V |
| Power Supplies | 24V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | On/Off |
| Nominal Supply Current | 800μA |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 2.35mm |
| Length | 13mm |
| Width | 7.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6375D Overview
It is package in Tube case.The 20-SOIC (0.295, 7.50mm Width) package contains it.It has been mounted as Surface Mount on the LED driver.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -25°C~125°C TJ.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.It produces a maximum output voltage of N-Channel volts at its maximum output.Features of the lighting driver are Status Flag.It comes under the family of L6375.As a result, there are 20 terminations.The operation is performed through the 20 pins.Currently, there are 1 functions associated with the lighting driver.It is necessary to reduce the maximum output current to 1.1A to meet the operation criteria.Using a voltage of 24V allows for high efficiency.The LED driving board is mounted in the way of Surface Mount.There are 20 pins in total on this board.In this case, the output current is set to 500mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.The maximum supply voltage is set to 35V.Normal operation requires a voltage above 8V for the supply voltage.This part has a power supply of 24V volts.
L6375D Features
Supplied from 24V
L6375D Applications
There are a lot of STMicroelectronics L6375D Power Switches ICs applications.
- Mobile Communication Devices
- Set-top-box
- Portable Devices
- Storage (HDDs, SSDs)
- USB Protection
- USB Power Distribution
- Notebook and Tablet Computers
- Smartphone and PDA
- USB3.1 Power Delivery
- Various applications equipped with buttons
