banner_page

L6375STR

24V N-Channel PMIC L6375 8 Pin 24V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: STMicroelectronics
  • Nocochips NO: 761-L6375STR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 282
  • Description: 24V N-Channel PMIC L6375 8 Pin 24V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -25°C~125°C TJ
Packaging Tape & Reel (TR)
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 8
ECCN Code EAR99
Subcategory Peripheral Drivers
Technology BCDMOS
Terminal Position DUAL
Terminal Form GULL WING
Number of Functions 1
Supply Voltage 24V
Current Rating 1.1A
Base Part Number L6375
Pin Count 8
Number of Outputs 1
Output Type N-Channel
Max Output Current 500mA
Supply Voltage-Max (Vsup) 35V
Power Supplies 24V
Supply Voltage-Min (Vsup) 8V
Interface On/Off
Output Configuration High Side
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Switch Type General Purpose
Ratio - Input:Output 1:1
Voltage - Load 8V~35V
Driver Number of Bits 1
Fault Protection Current Limiting (Fixed), Open Load Detect, Over Temperature, UVLO
Output Peak Current Limit-Nom 1.1A
Built-in Protections TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE
Length 4.9mm
Width 3.9mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

L6375STR Overview


A Tape & Reel (TR) is used to package it.The 8-SOIC (0.154, 3.90mm Width) package includes it.The lighting driver is mounted in the Surface Mount position.This switch is of type General Purpose.It is recommended that the temperature be set to -25°C~125°C TJ for reliable performance.In this LED driver, there are no outputs available.Operation is based on Not Required supply voltage.There is a maximum output voltage of N-Channel volts on this LED driver.It has a total of Status Flag features.It comes under the family of L6375.A total of 8 terminations can be found in it.It is necessary to use the 8 pins in order to operate the LED driver.There are 1 functions of the LED driver.The maximum output current drops to 500mA in order to meet the operation criteria.It is possible to achieve a high level of efficiency with a supply voltage of 24V.Surface Mount is mounted in the way of this LED driving board.This LED driver is equipped with a total of 8 pins.The output current is set to 500mA in this case.Self-contained in an econtainer with a capacity of Peripheral Drivers, this LED driver is self-contained.In this LED driver, the maximum supply voltage is configured to be 35V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 8V.In this case, the power supply is 24V.

L6375STR Features


Supplied from 24V

L6375STR Applications


There are a lot of STMicroelectronics L6375STR Power Switches ICs applications.

  • Portable Devices
  • USB Ports/Hubs
  • Notebook and Tablet Computers
  • Smartphone and PDA
  • Wearable Devices
  • Low Voltage I/O System Power
  • Portable GPS
  • Storage Drives
  • Portable/Handheld Devices
  • Wireless Headsets

Write a review

Note: HTML is not translated!
    Bad           Good