L6376D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Resistance | 640mOhm |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Current Rating | 900mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6376 |
| Pin Count | 20 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 9.5V |
| Number of Inputs | 4 |
| Max Input Voltage | 35V |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9.5V~35V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6376D Overview
It is packaged in the form of a Tube.This file is included in package 20-SOIC (0.433, 11.00mm Width) Exposed Pad.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type that it owns.To ensure reliable operation, set the temperature to -25°C~125°C TJ.To operate, it needs a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.This LED driving board is equipped with Status Flag features in order for it to be useful.This object belongs to the L6376 family.It contains 20 terminations.The 20 pins are used for the operation of the system.It consists of 4 functions.To comply with the operation criteria, the maximum output current is reduced to 500mA.The supply voltage can be 24V for high efficiency.This lighting driver is mounted in the way of Surface Mount.As a result, it has a total of 20 pins.Lighting drivers with 640mOhm resistance are used.The output current is set to 500mA in this case.A self-contained LED driver with a capacity of Peripheral Drivers is contained in an econtainer.For maximum efficiency, the supply voltage should be set to 35V.Voltage input is limited to 35V volts.As a minimum input voltage, it requires 9.5V volts.Inputs are provided at 4.
L6376D Features
Supplied from 24V
Resistance of 640mOhm
L6376D Applications
There are a lot of STMicroelectronics L6376D Power Switches ICs applications.
- Hard Disk Drives
- Set-top-box
- Hot-Swap Systems
- Gaming
- USB Ports/Hubs
- Handheld Devices
- Various applications equipped with buttons
- Solid State Drivers
- Notebook PC
- Set-Top Boxes
