L6376D013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 20 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Peripheral Drivers |
| Technology | BCD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 245 |
| Number of Functions | 4 |
| Supply Voltage | 24V |
| Terminal Pitch | 1.27mm |
| Current Rating | 500mA |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6376 |
| Pin Count | 20 |
| Number of Outputs | 4 |
| Output Type | N-Channel |
| Max Output Current | 900mA |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 9.5V |
| Clamping Voltage | 57V |
| Max Input Voltage | 35V |
| Output Current per Channel | 500mA |
| Nominal Input Voltage | 35V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 9.5V~35V |
| Driver Number of Bits | 4 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 0.9A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Height Seated (Max) | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6376D013TR Overview
A Tape & Reel (TR) is used to package it.It is included in the package 20-SOIC (0.433, 11.00mm Width) Exposed Pad.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -25°C~125°C TJ.It is possible to use 4 outputs in the lighting driver.In order to operate, it requires a voltage supply of Not Required.There is a maximum output voltage of N-Channel volts.A lighting driver with Status Flag features is available.The L6376 family consists of this type.It has a total of 20 terminations.The 20 pins are used to operate the LED driver.It has 4 functions.It is necessary to reduce the maximum output current to 900mA to meet the operation criteria.As long as the supply voltage is 24V, high efficiency can be achieved.Surface Mount is mounted in the way of this LED driving board.20 pins are equipped with it.When this case is used, the output current is set to 500mA.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.In order to achieve the best efficiency, the supply voltage should be set to 35V.Its maximum input voltage is 35V volts.As far as input voltage goes, it has a minimum of 9.5V volts.
L6376D013TR Features
Supplied from 24V
L6376D013TR Applications
There are a lot of STMicroelectronics L6376D013TR Power Switches ICs applications.
- Various applications equipped with buttons
- Portable GPS Device
- USB Protection
- Low Voltage I/O System Power
- Storage Drives
- PC Card Hot Swap
- Telecom and Network Systems
- Notebook PC
- Mobile Communication Devices
- Wireless/Networking Cards
