L6377D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Current Rating | 500mA |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6377 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Operating Supply Voltage | 35V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 35V |
| Output Current per Channel | 500mA |
| Nominal Input Voltage | 24V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6377D Overview
Tube is how it's packaged.It is included in the package 14-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.General Purpose is the switch type that it owns.It is best to set the temperature to -25°C~125°C TJ to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.Features of the lighting driver are Status Flag.It belongs to the family L6377.It contains 14 terminations.The 14 pins are used for the operation of the system.Currently, the lighting driver has a total of 1 functions.As a result, the maximum output current is reduced to 1.1A in order to meet the operation requirements.High efficiency is possible at 24V supply voltage.Surface Mount is mounted in the way.In total, it has 14 pins.In this case, the output current will be set to 500mA.The LED driver is packaged in an econtainer with a capacity of Peripheral Drivers.It is recommended that the supply voltage be set at 35V in order to achieve maximum efficiency.There is a maximum input voltage of 35V volts.The minimum input voltage is 8V volts.
L6377D Features
Supplied from 24V
L6377D Applications
There are a lot of STMicroelectronics L6377D Power Switches ICs applications.
- Telecom and Network Systems
- Portable Devices
- Smart Phones, Feature Phones
- USB Power Distribution
- Hard Disk Drives
- Portable GPS
- Portable/Handheld Devices
- Portable Music Players
- Mobile Communication Devices
- Hot Swap
