L6377D013TR
| Parameters | |
|---|---|
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Feature | Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Peripheral Drivers |
| Technology | BCDMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 24V |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6377 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 1.1A |
| Operating Supply Voltage | 35V |
| Power Supplies | 24V |
| Interface | On/Off |
| Output Configuration | High Side |
| Output Current | 500mA |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 8V |
| Max Input Voltage | 35V |
| Output Current per Channel | 500mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 8V~35V |
| Driver Number of Bits | 1 |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Output Peak Current Limit-Nom | 1.1A |
| Built-in Protections | TRANSIENT; OVER CURRENT; THERMAL; UNDER VOLTAGE |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -25°C~125°C TJ |
L6377D013TR Overview
Tape & Reel (TR) is the way it's packaged.There is a package for it in the 14-SOIC (0.154, 3.90mm Width) package.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -25°C~125°C TJ for reliable operation.It is possible to use 1 outputs in the lighting driver.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.It has a total of Status Flag features.It belongs to the L6377 family.As a result, there are 14 terminations.The operation is carried out using the 14 pins.Currently, the lighting driver has a total of 1 functions.This operation requires the maximum output current to be decreased to 1.1A.As long as the supply voltage is 24V, high efficiency can be achieved.The lighting driver is mounted in the way of Surface Mount.This LED driver is equipped with a total of 14 pins.In this case, the output current will be set to 500mA.There is a Peripheral Drivers capacity container for this LED driver that is self-contained.The power supply of the part is 24V.When using this LED driving board, it is recommended that the supply voltage is set to 35V.Input voltage is limited to 35V volts.Input voltage must be at least 8V volts.
L6377D013TR Features
Supplied from 24V
L6377D013TR Applications
There are a lot of STMicroelectronics L6377D013TR Power Switches ICs applications.
- Notebook and Tablet Computers
- Mobile Communication Devices
- USB Power Distribution
- Set-Top Boxes
- Telecom and Network Systems
- Wireless Modem Data Cards
- Notebook PC
- Smart Phones, Feature Phones
- Smartphone and PDA
- Handheld Devices
