L6384E
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 8 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -45°C~125°C TJ |
| Packaging | Tube |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | BCD |
| Voltage - Supply | 14.6V~16.6V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 14.4V |
| Frequency | 400kHz |
| Base Part Number | L6384 |
| Pin Count | 8 |
| Output Voltage | 580V |
| Max Output Current | 650mA |
| Operating Supply Voltage | 15.6V |
| Power Supplies | 14.4V |
| Nominal Supply Current | 25mA |
| Power Dissipation | 750mW |
| Max Supply Current | 25mA |
| Propagation Delay | 300 ns |
| Input Type | Inverting |
| Turn On Delay Time | 200 ns |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 300 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.5V 3.6V |
| Turn Off Time | 0.3 μs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 3.32mm |
| Length | 10.92mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6384E Overview
Its 8-DIP (0.300, 7.62mm) package is adopted for higher flexibility.A packaging method of Tube is used.A total of 2 drivers are integrated into its configuration.Ideally, it should be mounted in the direction of Through Hole.In the absence of a 14.6V~16.6V supply voltage, its superiority can be demonstrated.Gate drivers is designed wGate driversh a IGBT, N-Channel MOSFET gate.This device can operate at temperatures up to -45°C~125°C TJ.Inverting is used as the input type in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number L6384.Through Hole is the way it takes to mount the device.In the device, there are 8 pins.With a supply voltage of 14.4V, it is designed to operate.650mA is the maximum output current.This subcategory of MOSFET Drivers has a number of useful electronic components.A board with 8 component pins is available.A high-side voltage can be set up to 600V (Bootstrap).Its maximum power dissipation of 750mW shows its power loss capacity without overheating.For higher stability, the supply current should be kept at 25mA.With its power supplies of 14.4V, it solves the power supply problems for diverse applications.A voltage of 580V is output by this device.Mosfet gate drivers is recommended that you set the operating supply voltage to 15.6V.When 400kHz is used frequently, efficiency can be improved.
L6384E Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
L6384E Applications
There are a lot of STMicroelectronics L6384E gate drivers applications.
- Refrigerator
- Digitally controlled power supplies
- Commercial and agricultural vehicles (CAV)
- Head-up and Head mounted displays
- DC/DC converters
- Telecom switch mode power supplies
- Video amplifiers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Isolated Supplies for controller area network (CAN),
- High frequency line drivers
