L6385D
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | BCD |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L6385 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Power Supplies | 15V |
| Nominal Supply Current | 320μA |
| Power Dissipation | 750mW |
| Max Supply Current | 320μA |
| Propagation Delay | 110 ns |
| Input Type | Inverting |
| Turn On Delay Time | 110 ns |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.11 µs |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.5V 3.6V |
| Turn Off Time | 0.105 µs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6385D Overview
For greater flexibility, its 8-SOIC (0.154, 3.90mm Width) package is used.Gate drivers is package in Tube case.There are 2 drivers installed for this device.Surface Mount is mounted in the way.A supply voltage of 17V Max demonstrates its superiority.A gate type of IGBT, N-Channel MOSFET is used in its design.Mosfet driver is possible to use this device at temperatures as low as -40°C~150°C TJ.The input type for this program is Inverting.Mosfet driver is based on 8 terminations.You will find various related parts under the base part number L6385.Devices are mounted by Surface Mount.As a result, it is configured with 8 pins when it is designed.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 15V.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.The board has a total of 8 component pins.Max (Bootstrap) can be as high as 600V.Its maximum power dissipation of 750mW also demonstrates its maximum ability to transfer power without overheating.For higher stability, the supply current should be kept at 320μA.Due to its 15V power supply, it can solve power supply problems for an array of diverse applications.By using 400kHz frequency, efficiency can be increased.Resistance 125Ohm is used for operation.
L6385D Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
Resistance of 125Ohm
L6385D Applications
There are a lot of STMicroelectronics L6385D gate drivers applications.
- Active Clamp Flyback or Forward and Synchronous Rectifier
- Commercial air-conditioning (CAC)
- Isolated switch mode power supplies (SMPS)
- Isolated Gate Driver Supplies
- Portable computers
- White Goods - Air Conditioner, Washing Machine,
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Industrial Power Supplies
- High-speed communications
- Head-up and Head mounted displays
