L6385E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | BCD |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 400kHz |
| Base Part Number | L6385 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 580V |
| Max Output Current | 650mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 250μA |
| Power Dissipation | 750mW |
| Propagation Delay | 110 ns |
| Input Type | Inverting |
| Turn On Delay Time | 110 ns |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 105 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.5V 3.6V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 3.32mm |
| Length | 10.92mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6385E Overview
For greater flexibility, its 8-DIP (0.300, 7.62mm) package is used.Tube represents the packaging method.There is a mounting bracket in the way of Through Hole.A supply voltage of 17V Max demonstrates its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.This device can operate at temperatures up to -40°C~150°C TJ.This program uses the input type of Inverting.Its configuration starts with 8 terminations.Numerous related parts can be found under its base part number L6385.Devices are mounted by Through Hole.When designing, the device is configured with 8 pins.With a supply voltage of 15V, it is designed to operate.In the maximum case, the output current can be 650mA volts.Within this subcategory of MOSFET Drivers, there are several useful electronic components.The component has 8 pins.There can be a voltage up to 600V on the high-side (Bootstrap).The basis has 2 integrated outputs.Its maximum power dissipation of 750mW shows its power loss capacity without overheating.The voltage it outputs is 580V.The operating supply voltage should be set at 15V.The frequency of 400kHz can be adjusted in order to improve efficiency.
L6385E Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
L6385E Applications
There are a lot of STMicroelectronics L6385E gate drivers applications.
- Portable computers
- Motor Controls
- Topologies
- Broadcast equipment
- Isolated Supplies for controller area network (CAN),
- Smart Phones
- Portable Media Players
- Automotive Applications
- High power buffers
- Isolated Supplies for Motor Control
