L6386D013TR
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 750mW |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | L6386 |
| Pin Count | 14 |
| Qualification Status | Not Qualified |
| Max Output Current | 650mA |
| Nominal Supply Current | 320μA |
| Power Dissipation | 750mW |
| Output Current | 650mA |
| Max Supply Current | 320μA |
| Propagation Delay | 150 ns |
| Input Type | Inverting |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Turn On Time | 0.015 µs |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.5V 3.6V |
| Turn Off Time | 0.015 µs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height Seated (Max) | 1.75mm |
| Length | 8.65mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6386D013TR Overview
For greater flexibility, its 14-SOIC (0.154, 3.90mm Width) package is used.Tape & Reel (TR) is the packaging method.This device is equipped with 2 drivers for its configuration.In the direction of Surface Mount, gate drivers is mounted.By using 17V Max supply voltage, it is able to demonstrate its superiority.This device is designed with a IGBT, N-Channel MOSFET gate type.In this device, temperatures must not exceed -40°C~150°C TJ.Inverting is used as the input type.Mosfet driver consists of 14 terminations as Mosfet drivers foundation.There are various parts that can be found under its base part number L6386.The device is mounted with Surface Mount.When the device is designed, it has 14 pins.Mosfet driver is designed specifically to run on 15V volts of power.In the maximum case, the output current can be limited to 650mA.The component has 14 pins.Max (Bootstrap) can be as high as 600V.An output current of 650mA is supported.Using 750mW as an example, the maximum power dissipation shows how well it is able to transfer and conduct power loss without becoming overheated.As a precaution, make sure the supply current is kept at 320μA.The frequency of 400kHz can result in an improvement in efficiency.
L6386D013TR Features
Embedded in the Tape & Reel (TR) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
L6386D013TR Applications
There are a lot of STMicroelectronics L6386D013TR gate drivers applications.
- Solar inverters
- Portable Navigation Devices
- High frequency line drivers
- Dual-Battery Systems
- Topologies
- Active filtering
- Portable computers
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- PCMCIA applications
- LCD/LCoS/DLP portable and embedded pico projectors
