L6386ED013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | BCD |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 400kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6386 |
| Pin Count | 14 |
| Number of Outputs | 2 |
| Output Voltage | 580V |
| Max Output Current | 650mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 320μA |
| Power Dissipation | 750mW |
| Output Current | 650mA |
| Propagation Delay | 150 ns |
| Input Type | Inverting |
| Turn On Delay Time | 150 ps |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 150 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Turn On Time | 0.15 µs |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.5V 3.6V |
| Turn Off Time | 0.15 µs |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6386ED013TR Overview
Its 14-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.A packaging method of Tape & Reel (TR) is used.Surface Mount is mounted in the way.WGate driversh a 17V Max supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.The gate type on this device is IGBT, N-Channel MOSFET.The allowable temperature range that this device can be operated in is -40°C~150°C TJ.Input type of Inverting is used.The configuration is based on 14 terminations.Mosfet driver contains a variety of related parts under Mosfet drivers base part number L6386.Mounting the device requires Surface Mount.Devices have 14 pins available.The device is specifically designed to operate at 15V volts.There is a maximum output current of 650mA.There are several useful electronic components within its subcategory MOSFET Drivers.The number of component pins is 14.Max (Bootstrap) can be as high as 600V.The basis of this system consists of 2 outputs.Mosfet gate drivers supports a current output of 650mA.Its maximum power dissipation of 750mW shows its power loss capacity without overheating.As a result, a voltage of 580V is produced.In order to operate properly, the operating supply voltage should be set to 15V.The frequency of 400kHz can be adjusted in order to improve efficiency.
L6386ED013TR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
L6386ED013TR Applications
There are a lot of STMicroelectronics L6386ED013TR gate drivers applications.
- Smart Phones
- DC/DC converters
- General Purpose 3-Phase Inverter
- Broadcast equipment
- Portable computers
- RGB applications
- High power buffers
- Motor Control
- High frequency line drivers
- Motor Controls
