L6387E
| Parameters | |
|---|---|
| Lifecycle Status | NRND (Last Updated: 8 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Operating Temperature | -45°C~125°C TJ |
| Packaging | Tube |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | BCD |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 400kHz |
| Base Part Number | L6387 |
| Pin Count | 8 |
| Max Output Current | 650mA |
| Power Supplies | 15V |
| Power Dissipation | 750mW |
| Propagation Delay | 110 ns |
| Input Type | Inverting |
| Turn On Delay Time | 110 ns |
| Rise Time | 50ns |
| Fall Time (Typ) | 30 ns |
| Turn-Off Delay Time | 105 ns |
| Rise / Fall Time (Typ) | 50ns 30ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.5V 3.6V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 3.32mm |
| Length | 10.92mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6387E Overview
In order to increase flexibility, the package 8-DIP (0.300, 7.62mm) is used.Gate drivers is package in Tube case.Configuration is supported by 2 drivers.In the direction of Through Hole, gate drivers is mounted.By using 17V Max supply voltage, it is able to demonstrate its superiority.Gate drivers is designed wGate driversh a gate type of IGBT, N-Channel MOSFET.Temperature range -45°C~125°C TJ is allowed for this device.This program uses the input type of Inverting.There are 8 terminations to form the base of its configuration.Under its base part number L6387, various related parts can be found.In this case, Through Hole indicates how the device is mounted.During design, it is configured with 8 pins.The device is specifically designed to function with a supply voltage of 15V V.The maximum output current can amount to 650mA.There are various useful electronic components in its subcategory MOSFET Drivers.A total of 8 pins are available for component connections.Ideally, the high-side voltage should not exceed 600V.750mW dissipates maximum power without overheating, showing its maximum capability to transfer and conduct power loss.Mosfet gate drivers solves the power supply problems for diverse applications based on Mosfet gate driverss power supplies of 15V.The frequency of 400kHz can improve efficiency.
L6387E Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
L6387E Applications
There are a lot of STMicroelectronics L6387E gate drivers applications.
- Commercial air-conditioning (CAC)
- Dual-Battery Systems
- Smart Phones
- Solar power supplies
- 3-Phase Motor Inverter Driver
- serial peripheral interface (SPI), I2C
- Industrial Modules
- Motor Controls
- Industrial Motor Inverter - Power Tools, Robotics
- Isolated Supplies for Motor Control
