L6388ED
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | BCD |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 400kHz |
| Base Part Number | L6388 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 580V |
| Max Output Current | 650mA |
| Power Supplies | 15V |
| Power Dissipation | 750mW |
| Propagation Delay | 300 ns |
| Input Type | Inverting |
| Turn On Delay Time | 300 ps |
| Rise Time | 100ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 220 ns |
| Rise / Fall Time (Typ) | 70ns 40ns |
| Channel Type | Independent |
| Turn On Time | 0.3 μs |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.8V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.25mm |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6388ED Overview
A higher degree of flexibility is achieved by adopting its 8-SOIC (0.154, 3.90mm Width) package.A packaging method of Tube is indicated.Surface Mount is mounted in the way of the device.WGate driversh a 17V Max supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~150°C TJ.Inverting is used as its input type.8 terminations constitute its foundation.Many related parts can be found under its base part number L6388.The device is mounted using Surface Mount.When designing, the device is configured with 8 pins.With a supply voltage of 15V, it is designed to operate.There is a maximum output current of 650mA.Its subcategory of MOSFET Drivers contains various useful electronic components.On the board, there are 8 component pins.The high-side voltage - Max (Bootstrap) can be up to 600V.The basis of the model has 2 outputs integrated.According to its maximum power dissipation, 750mW is capable of conducting and transferring a large amount of power without overheating.With its 15V power supply, it provides power for diverse applications.In this case, the voltage output is 580V.The frequency of 400kHz can be adjusted in order to improve efficiency.
L6388ED Features
Embedded in the Tube package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
L6388ED Applications
There are a lot of STMicroelectronics L6388ED gate drivers applications.
- Commercial and agricultural vehicles (CAV)
- Topologies
- Active filtering
- Industrial Power Supplies
- Pulse transformer drivers
- A/D drivers
- Motor Control
- serial peripheral interface (SPI), I2C
- Portable Navigation Devices
- General Purpose 3-Phase Inverter
