L6388ED013TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Resistance | 125Ohm |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 750mW |
| Technology | BCD |
| Voltage - Supply | 17V Max |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 400kHz |
| Base Part Number | L6388 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 580V |
| Max Output Current | 650mA |
| Operating Supply Voltage | 15V |
| Nominal Supply Current | 450μA |
| Power Dissipation | 750mW |
| Output Current | 650mA |
| Propagation Delay | 300 ns |
| Input Type | Inverting |
| Turn On Delay Time | 300 ps |
| Rise Time | 100ns |
| Fall Time (Typ) | 80 ns |
| Turn-Off Delay Time | 220 ns |
| Rise / Fall Time (Typ) | 70ns 40ns |
| Channel Type | Independent |
| Turn On Time | 0.3 µs |
| Output Peak Current Limit-Nom | 0.65A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 400mA 650mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.8V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6388ED013TR Overview
In order to increase flexibility, the package 8-SOIC (0.154, 3.90mm Width) is used.Gate drivers is packaged in the way of Tape & Reel (TR).Its recommended mounting way is Surface Mount.Using a 17V Max supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.IGBT, N-Channel MOSFET is the gate type used for this design.There is a temperature range for this device of -40°C~125°C TJ.Inverting is the input type used in this program.Mosfet driver consists of 8 terminations as Mosfet drivers foundation.Many related parts can be found under its base part number L6388.The device is mounted with Surface Mount.When designing, the device is configured with 8 pins.In order to operate, a voltage of 15V has to be applied.In the maximum case, the output current can be 650mA volts.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.Components with 8 pins are available.Maximum (Bootstrap) voltage can be up to 600V.The basis of this system consists of 2 outputs.This device is capable of delivering 650mA current.Considering its maximum power dissipation, 750mW shows its maximum capacity to transfer and conduct power loss without overheating.In this case, it produces a voltage of 580V.Mosfet gate drivers is recommended that 15V be set as the operating supply voltage.The frequency of 400kHz can improve efficiency.This device requires a resistance value of 125Ohm.
L6388ED013TR Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 750mW
Resistance of 125Ohm
L6388ED013TR Applications
There are a lot of STMicroelectronics L6388ED013TR gate drivers applications.
- Digitally controlled power supplies
- serial peripheral interface (SPI), I2C
- 3-Phase Motor Inverter Driver
- Uninterruptible Power Supplies (UPS)
- UPS systems
- Refrigerator
- Telecom switch mode power supplies
- High-voltage isolated DC-DC converters
- General Purpose 3-Phase Inverter
- DC/DC converters
