L6391D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Voltage - Supply | 12.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 800kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | L6391 |
| Pin Count | 14 |
| Output Voltage | 580V |
| Max Output Current | 430mA |
| Power Supplies | 15V |
| Nominal Supply Current | 100μA |
| Power Dissipation | 800mW |
| Output Current | 290mA |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ns |
| Rise Time | 120ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Interface IC Type | BUFFER OR INVERTER BASED MOSFET DRIVER |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 430mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6391D Overview
Its 14-SOIC (0.154, 3.90mm Width) package is adopted for higher flexibility.Tube is the form of the package.Gate drivers is configured wGate driversh 2 drivers.There is a mounting bracket in the way of Surface Mount.When the supply voltage is 12.5V~20V it is able to demonstrate its superiority.There is a gate type of IGBT, N-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~150°C TJ.The input type for this program is Non-Inverting.It's configured with 14 terminations.Numerous related parts are available for its base part number L6391.You mount it with Surface Mount.In the device, there are 14 pins.With a supply voltage of 15V, it is designed to operate.As its interface IC, BUFFER OR INVERTER BASED MOSFET DRIVER is being employed.There is a maximum output current of 430mA.There are several useful electronic components found in its subcategory of MOSFET Drivers.14 pins are present on the component.There can be a voltage up to 600V on the high-side (Bootstrap).The output current can be set to 290mA.According to its maximum power dissipation, 800mW is capable of conducting and transferring a large amount of power without overheating.With its power supplies of 15V, it solves the power supply problems for diverse applications.In this case, the voltage is 580V.When 800kHz is used frequently, efficiency can be improved.
L6391D Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 800mW
L6391D Applications
There are a lot of STMicroelectronics L6391D gate drivers applications.
- Solar inverters
- LCD/LCoS/DLP portable and embedded pico projectors
- Isolated Supplies for controller area network (CAN),
- Isolated Supplies for Motor Control
- High-speed communications
- Refrigerator
- Power factor correction (PFC) circuits
- Broadcast equipment
- Welding
- Commercial and agricultural vehicles (CAV)
