L6392D
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | BCD |
| Voltage - Supply | 12.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 800kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6392 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 580V |
| Max Output Current | 430mA |
| Nominal Supply Current | 290mA |
| Power Dissipation | 800mW |
| Output Current | 430mA |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ns |
| Rise Time | 120ns |
| Fall Time (Typ) | 70 ns |
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.43A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 430mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.65mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6392D Overview
A higher level of flexibility is provided by its 14-SOIC (0.154, 3.90mm Width) package.A package of Tube has been used.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Ideally, it should be mounted in the direction of Surface Mount.In the absence of a power supply voltage of 12.5V~20V V, it is able to demonstrate its superiority.This gate type has a IGBT, N-Channel MOSFET design.Temperature range -40°C~125°C TJ is allowed for this device.Non-Inverting is the input type used in this program.Its configuration is based on a total of 14 terminations.Numerous related parts are available for its base part number L6392.Mounting the device requires Surface Mount.During design, it is configured with 14 pins.In order to operate, a voltage of 15V has to be applied.In the maximum case, the output current can be 430mA volts.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.A total of 14 pins are available for component connections.The high-side voltage - Max (Bootstrap) can be up to 600V.The basis of this system consists of 1 outputs.Mosfet gate drivers can deliver a current of 430mA.Based on the maximum power dissipation of 800mW, it is clear that it is capable of transferring and conducting power losses without becoming overheated.A voltage of 580V is output by this device.By increasing the frequency of 800kHz, efficiency can be improved.
L6392D Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 800mW
L6392D Applications
There are a lot of STMicroelectronics L6392D gate drivers applications.
- Solar power supplies
- Pulse transformer drivers
- Power factor correction (PFC) circuits
- Motor Controls
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- DC/DC converters
- High frequency line drivers
- Isolated Supplies for Motor Control
- PCMCIA applications
- High power buffers
