L6392DTR
| Parameters | |
|---|---|
| Turn-Off Delay Time | 200 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Channel Type | Independent |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.43A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 430mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | BCD |
| Voltage - Supply | 12.5V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 800kHz |
| Base Part Number | L6392 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 580V |
| Max Output Current | 430mA |
| Nominal Supply Current | 290mA |
| Power Dissipation | 800mW |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 200 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 35 ns |
L6392DTR Overview
A higher degree of flexibility is achieved by adopting its 14-SOIC (0.154, 3.90mm Width) package.Cut Tape (CT) is the form of the package.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.In this case, gate drivers is mounted along the way of Surface Mount.Gate drivers can demonstrate Gate driverss superiorGate driversy wGate driversh a 12.5V~20V supply voltage.There is a gate type of IGBT, N-Channel MOSFET in this design.This device allows temperatures in the range of -40°C~125°C TJ.Non-Inverting is used as the input type in this program.Its configuration starts with 14 terminations.Numerous related parts are available for its base part number L6392.The device is mounted with Surface Mount.When designing, the device is configured with 14 pins.This device operates with 15V supply voltage.An output current as high as 430mA can be achieved at maximum power.This subcategory of MOSFET Drivers has a number of useful electronic components.The board has a total of 14 component pins.Maximum (Bootstrap) voltage is 600V.Mosfet driver has been integrated wMosfet driverh a total of 1 outputs for Mosfet drivers basis.Having the maximum power dissipation of 800mW indicates its maximum capacity to conduct power losses without overheating.In this case, the voltage output is 580V.When 800kHz is used frequently, efficiency can be improved.
L6392DTR Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 800mW
L6392DTR Applications
There are a lot of STMicroelectronics L6392DTR gate drivers applications.
- Active filtering
- Video amplifiers
- Smart Phones
- Industrial Modules
- Power factor correction (PFC) circuits
- Industrial Power Supplies
- Isolated Gate Driver Supplies
- High-voltage isolated DC-DC converters
- 3-Phase Motor Inverter Driver
- Commercial air-conditioning (CAC)
