L6393D
| Parameters | |
|---|---|
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | BCD |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 800kHz |
| Base Part Number | L6393 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 580V |
| Max Output Current | 430mA |
| Nominal Supply Current | 270mA |
| Power Dissipation | 800mW |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.43A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 430mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Height | 1.65mm |
L6393D Overview
In order to increase flexibility, the package 14-SOIC (0.154, 3.90mm Width) is used.A packaging method of Tube is used.Configuration is supported by 2 drivers.There is a mounting bracket in the way of Surface Mount.Using a 10V~20V supply voltage, gate drivers is capable of demonstrating Gate driverss superiorGate driversy.Gate type IGBT, N-Channel MOSFET is designed for it.The allowable temperature range that this device can be operated in is -40°C~125°C TJ.Non-Inverting is used as the input type.Mosfet driver is based on 14 terminations.You will find various related parts under the base part number L6393.Mosfet driver is mounted using Surface Mount.During design, it is configured with 14 pins.The device is specifically designed to operate at 15V volts.There is a maximum output current of 430mA.The subcategory of MOSFET Drivers contains a wide variety of useful electronic components.Components with 14 pins are available.Mosfet driver is possible for the high-side voltage - Max (Bootstrap) to be as low as 600V.In terms of its basis, there are 1 outputs integrated.The maximum power dissipation of 800mW shows its maximum capability to transfer and conduct power loss without overheating.When this voltage is produced, it is marked as 580V.By using the frequency 800kHz, we can increase efficiency.
L6393D Features
Embedded in the Tube package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 800mW
L6393D Applications
There are a lot of STMicroelectronics L6393D gate drivers applications.
- serial peripheral interface (SPI), I2C
- Smart Phones
- Motor Control
- Power factor correction (PFC) circuits
- Motor Controls
- DC-DC Converters
- High power buffers
- Line drivers
- Head-up and Head mounted displays
- Active Clamp Flyback or Forward and Synchronous Rectifier
