L6393DTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | MOSFET Drivers |
| Max Power Dissipation | 800mW |
| Technology | BCD |
| Voltage - Supply | 10V~20V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Frequency | 800kHz |
| Base Part Number | L6393 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Output Voltage | 580V |
| Max Output Current | 430mA |
| Nominal Supply Current | 270mA |
| Power Dissipation | 800mW |
| Propagation Delay | 200 ns |
| Input Type | Non-Inverting |
| Turn On Delay Time | 30 ns |
| Rise Time | 75ns |
| Fall Time (Typ) | 35 ns |
| Turn-Off Delay Time | 30 ns |
| Rise / Fall Time (Typ) | 75ns 35ns |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Output Peak Current Limit-Nom | 0.43A |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 290mA 430mA |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 1.1V 1.9V |
| High Side Voltage - Max (Bootstrap) | 600V |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
L6393DTR Overview
A higher degree of flexibility is achieved by adopting its 14-SOIC (0.154, 3.90mm Width) package.Gate drivers is package in Cut Tape (CT) case.Gate drivers incorporates wGate driversh 2 drivers for Gate driverss configuration.Gate drivers is mounted in the way of Surface Mount.When the supply voltage is 10V~20V it is able to demonstrate its superiority.Gate type IGBT, N-Channel MOSFET has been used in its design.This device is allowed to operate in a temperature range of -40°C~125°C TJ.The input type for this program is Non-Inverting.The configuration starts with 14 terminations.Numerous related parts are available for its base part number L6393.Devices are mounted by Surface Mount.When the device is designed, it has 14 pins.In order to operate, a voltage of 15V has to be applied.There is a maximum output current of 430mA.In this subcategory of MOSFET Drivers, there are numerous useful electronic components.The board has 14 component pins.A boot strap voltage of 600V is the maximum possible high-side voltage.Based on its basis, it integrates 1 outputs.According to its maximum power dissipation, 800mW is capable of conducting and transferring a large amount of power without overheating.In this case, it outputs 580V voltage.A frequency of 800kHz can improve efficiency.
L6393DTR Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
14 pins
High-side voltage - Max (Bootstrap) of 600V
Maximum power dissipation of 800mW
L6393DTR Applications
There are a lot of STMicroelectronics L6393DTR gate drivers applications.
- Motor controllers
- Motor Drives
- Smart Phones
- 48 V to 12 V PoL Converters, 48 V to Low Voltage Bus Converter,
- Dual-Battery Systems
- Solar inverters
- Industrial motor drives - compact, standard, premium, servo drives
- PCMCIA applications
- Active Clamp Flyback or Forward and Synchronous Rectifier
- UPS systems
