L6470PDTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Manufacturer Package Identifier | L6470PDTR |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | STSPIN L64 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| HTS Code | 8542.39.00.01 |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 5W |
| Technology | DMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 36V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6470 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Output Voltage | 45V |
| Max Output Current | 3A |
| Power Supplies | 3.3/5V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | SPI |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Supply Current-Max (Isup) | 0.65mA |
| Voltage - Load | 8V~45V |
| Max Junction Temperature (Tj) | 150°C |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/128 |
| Height | 3.6mm |
| Length | 15.9mm |
| Width | 11mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6470PDTR Overview
This package was designed with Tape & Reel (TR)in mind.There is 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case included with the part.Ideally, the part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.There is a capability for the device to provide 3.3V 5V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.There are 36 terminations available on this part.A voltage of 8V~45Vcan be applied to the load.I would like to remind you that this amplifier should be operated at 36V.There is Surface Mount recommended mounting method for this device.Based on the L6470part number, it is found.There are 36 pins on it.The Motion Control Electronicsseries contains it.45Vis maintained as the output voltage.In this case, the output voltage is maintained at STSPIN L64.The motor type can be recognized as Stepper.In order to satisfy the requirements of operation, the maximum output current reaches [0].
L6470PDTR Features
Applications : General Purpose
Load voltage across the chip 8V~45V
base on L6470 number
Motor Type classified as Stepper
L6470PDTR Applications
There are a lot of STMicroelectronics L6470PDTR motor drivers applications.
- Lighting for the ambience of tunability
- Smart lighting applications
- Landscape lighting
- Human-centric lighting
- Daytime running lights (DRLs)
- Monitoring the energy that the luminaire uses
- Outdoor area lights
- Indicator circuit
- RGB and monochromatic LED drivers for signage and traffic signals
- Telltale lights
