L6472PD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad |
| Number of Pins | 36 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | STSPIN L64 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 36 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Additional Feature | ALSO OPERATES AT 5 VOLT |
| Subcategory | Motion Control Electronics |
| Max Power Dissipation | 5W |
| Technology | DMOS |
| Voltage - Supply | 3.3V 5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 36V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6472 |
| Function | Driver - Fully Integrated, Control and Power Stage |
| Number of Outputs | 1 |
| Output Voltage | 45V |
| Max Output Current | 3A |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 8V |
| Interface | SPI |
| Operating Supply Current | 500μA |
| Output Configuration | Half Bridge (4) |
| Logic Function | AND |
| Supply Current-Max (Isup) | 0.65mA |
| Collector Emitter Voltage (VCEO) | 45V |
| Max Collector Current | 3A |
| Voltage - Load | 8V~45V |
| Switching Frequency | 512kHz |
| Motor Type | Stepper |
| Motor Type - Stepper | Bipolar |
| Step Resolution | 1 ~ 1/16 |
| Height | 3.3mm |
| Length | 16mm |
| Width | 11.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6472PD Overview
The package contains [0].There is 36-BSSOP (0.433, 11.00mm Width) Exposed Pad case included with the part.The part should be mounted by Surface Mount.The component connected in General Purposematches it perfectly.The device is capable of supplying a voltage of 3.3V 5V volts.In terms of operating temperature, it falls within the range -40°C~150°C TJ.There are 36 terminations available in the part.There is the option of applying the voltage to the load at the rate of 8V~45V.Drivers controllers is important to note that this amplifier should be operated at the 36Vsetting.Surface Mountis its recommended mounting method.L6472is the part number that finds it.36 pins are provided for its design.Drivers controllers is a part of the Motion Control Electronics series.1outputs are available.A voltage of 45Vis maintained at the output.There is STSPIN L64 change in the output voltage.Steppercan be recognized as a motor type.Drivers controllers also has a characteristic of [0].In order to satisfy the requirements of operation, the maximum output current reaches [0].For its operation, a supply current of 500μAis used.
L6472PD Features
Applications : General Purpose
Load voltage across the chip 8V~45V
base on L6472 number
designed with 1 outputs
Motor Type classified as Stepper
Additional Feature: ALSO OPERATES AT 5 VOLT
L6472PD Applications
There are a lot of STMicroelectronics L6472PD motor drivers applications.
- Daytime running lights (DRLs)
- Tunnel lights
- Fog lamps
- PDAs
- Handheld devices
- Step-up or step-down driver topologies
- Hospitality buildings
- Brake lights
- Hazardous application
- CHMSL (center high-mount stop lamps)
