L6562ATD
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -25°C~125°C |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 650mW |
| Voltage - Supply | 10.5V~22.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 1.27mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | L6562 |
| Pin Count | 8 |
| Input Voltage-Nom | 12V |
| Power Supplies | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3.5mA |
| Max Supply Current | 5.5mA |
| Input Voltage (Min) | 10.5V |
| Input Voltage (Max) | 22.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Mode | Discontinuous (Transition) |
| Switching Frequency | 1MHz |
| Current - Startup | 30μA |
| Height | 1.65mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6562ATD Overview
A 8-SOIC (0.154, 3.90mm Width) package contains it.The package is Tube-shaped.The device's mounting type is Surface Mount.In order to operate it, it should be connected to the voltage supply of 10.5V~22.5V.-25°C~125°C is the device's operating mode.Besides SWITCHING CONTROLLER, there are other types of IC in this part.The gadget has a number of 8 terminals on the back of it.30μA represents the startup current.Pin number 8 remains the same for the component.I think the best thing about this device is that there is a number of L6562 in it.The 8 pins are summed up.With a minimum input voltage of 10.5V, it can function.It's a subclass of Switching Regulator or Controllers in a way.The maximum input voltage (Max) of the circuit is 22.5V.The mountain forms part of mount Surface Mount.As a rule of thumb, the component is always powered by a 12V volt supply.At most, it can operate at 5.5mA degrees Celsius.Supplies for the device are 12V.A supply current setting of 3.5mA has been set on the gadget to provide power.
L6562ATD Features
L6562ATD Applications
There are a lot of STMicroelectronics L6562ATD PFC PMICs applications.
- LED lighting
- LCD backlight
- HVAC (Heating, Ventilation, and Air Conditioning)
- Laboratory
- ADAS (Advanced Driver-Assistance System)
- Decoupling circuit
- Signal chain
- Servers
- Subsequent
- Ethernet condition monitoring vibration sensor
