L6565N
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Number of Pins | 8 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Base Part Number | L6565 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 3.5mA |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 10.3V~18V |
| Max Supply Current | 5mA |
| Quiescent Current | 3.5mA |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Control Technique | RESONANT CONTROL |
| Rise Time | 40ns |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting |
| Switching Frequency | 70kHz |
| Output Isolation | Isolated |
| Voltage - Start Up | 13.5V |
| Width | 7.62mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6565N Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm) contains the ac to dc converter.The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.It can be used within the range of 10.3V~18V supply voltage (Vcc/Vdd).In total, there are 8 terminations.On this ac/dc converter, there are 8 pins.The pins of the ac-dc converter count up to 8 .It is suitable for mounting by Through Hole .Similar acdc converters can be found using the L6565 family.A total of 1 outputs need to be run.AC to DC converter is contained in Switching Regulator or Controllers .There is 400mA output current set.Here is the standard for REACH SVHC : No SVHC .Approximately 5mA amps of supply current can be handled by the power AC DC.The AC to DC power supply consumes quiescent current at 3.5mA .
L6565N Features
Packaged with 8-DIP (0.300, 7.62mm)
With 8 pins
Output Current at 400mA
L6565N Applications
There are a lot of STMicroelectronics L6565N AC DC Converters applications.
- Switching AC-DC Charger
- AC/DC Adaptors/Chargers for Cordless Phone
- Automotive Telematics
- Set -Top Box (STB) Power Supply
- Adapter for ADSL
- Lighting controls
- Power adapters for monitors
- LED Driver
- Digital cameras
- Battery chargers for mobile devices with touchpad display
