L6566ATR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO CONFIGURE IN RESONANT CONTROL |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 750mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Base Part Number | L6566 |
| Pin Count | 16 |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | POWER FACTOR CONTROLLER WITH POST REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 8V~23V |
| Control Features | Frequency Control, Soft Start |
| Input Voltage (Min) | 10.6V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 0.8A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 23V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | BOOST |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Height Seated (Max) | 1.75mm |
| Length | 10mm |
| Width | 3.9mm |
| RoHS Status | ROHS3 Compliant |
L6566ATR Overview
In the 16-SOIC (0.154, 3.90mm Width) package, the ac to dc converter is embedded.The AC/DC power converter Tape & Reel (TR) is available for this product.The AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is POWER FACTOR CONTROLLER WITH POST REGULATOR .As a result, the switching frequency reaches 100kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 8V~23V , the AC/DC converter may be used.As a result, it has a total of 16 terminations.In this ac/dc converter, there are 16 pins.The ac-dc converter has 16 pins.The ac dc converters are suitable for mounting by Surface Mount .The L6566 family can be used to search for similar acdc converters.The following ac to dc conversions are contained in Switching Regulator or Controllers .Based on a unique technique, it is possible to ensure input voltages with the maximal value of 23V .Ac to dc inverters can be supplied with a maximum current of 0.8A .In addition to ALSO CONFIGURE IN RESONANT CONTROL , this ACDC converter can also be used to determine ALSO CONFIGURE IN RESONANT CONTROL .
L6566ATR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 100kHz
With 16 pins
L6566ATR Applications
There are a lot of STMicroelectronics L6566ATR AC DC Converters applications.
- AC--DC Adapter
- Set-top boxes
- Adapters for Handheld Electronics
- Low power ac?dc Adapters for Chargers
- Battery chargers for cordless
- AC/DC LED Driver applications
- Universal Off-Line Power Supplies
- Remotely-controlled appliances
- Portable Apparatus
- Power tools fast chargers with trickle and on/off
