L6566BHTR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 750mW |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Frequency | 300kHz |
| Base Part Number | L6566 |
| Pin Count | 16 |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 8V~23V |
| Max Supply Current | 4.6mA |
| Control Features | Soft Start |
| Input Voltage (Min) | 8V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 10kHz~300kHz |
| Input Voltage (Max) | 23V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 50ns |
| Fall Time (Typ) | 40 ns |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | No |
| Fault Protection | Current Limiting, Over Load |
| Max Duty Cycle | 75 % |
| Output Isolation | Isolated |
| Voltage - Start Up | 14V |
| Height Seated (Max) | 1.75mm |
| Length | 9.8mm |
| Width | 3.8mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
L6566BHTR Overview
This ac to dc converter is included in the package 16-SOIC (0.154, 3.90mm Width) .The ac dc converter is available in Cut Tape (CT) case.There is a mounting point for this AC/DC converter in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.As soon as the switching frequency reaches 10kHz~300kHz , the circuit is closed.Supply voltage (Vcc/Vdd) does not need to exceed 8V~23V .In total, there are 16 terminations.It contains 16 pins.The pins of the ac-dc converter total to 16 .The ac dc converters is suitable for mounting by Surface Mount .A similar acdc converter can be searched by using the L6566 family.The ac to dc conversions are included in Switching Regulator or Controllers .There is 800mA output current set.AC to DC converter is able to reach high efficiency when its frequency is 300kHz .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 23V .Approximately 4.6mA amps of supply current can be handled by the power AC DC.
L6566BHTR Features
Packaged with 16-SOIC (0.154, 3.90mm Width)
Switching Frequency at 10kHz~300kHz
With 16 pins
Output Current at 800mA
L6566BHTR Applications
There are a lot of STMicroelectronics L6566BHTR AC DC Converters applications.
- Standby power supplies for VCR
- Switching AC-DC Adapter
- Switching AC-DC Charger
- Utility meters
- Adapters
- Low power ac?dc Adapters for Chargers
- ZigBee
- SMPS house keeping power supplies
- Cellular phone chargers
- Set -Top Box (STB) Power Supply
