L6571AD013TR
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 7 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 10V~16.6V |
| Base Part Number | L6571 |
| Number of Outputs | 2 |
| Max Output Current | 275mA |
| Max Supply Voltage | 16.6V |
| Min Supply Voltage | 10V |
| Nominal Supply Current | 25mA |
| Max Supply Current | 25mA |
| Input Type | RC Input Circuit |
| Channel Type | Synchronous |
| Number of Drivers | 2 |
| Driven Configuration | Half-Bridge |
| Gate Type | IGBT, N-Channel MOSFET |
| Current - Peak Output (Source, Sink) | 170mA 270mA |
| High Side Voltage - Max (Bootstrap) | 600V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
L6571AD013TR Overview
Gate drivers provides greater flexibilGate driversy to use the 8-SOIC (0.154, 3.90mm Width) package.The packaging method is indicated by Cut Tape (CT).This configuration includes 2 drivers.Ideally, it should be mounted in the direction of Surface Mount.A supply voltage of 10V~16.6V demonstrates its superiority.A gate type of IGBT, N-Channel MOSFET has been used in its design.In this device, temperatures must not exceed -40°C~150°C TJ.The input type for this program is RC Input Circuit.Numerous related parts can be found under its base part number L6571.The device is mounted with Surface Mount.At the time of design, it is configured with 8 pins.Mosfet driver is possible for the output current to be as low as 275mA.Mosfet driver is possible to set the high-side voltage - Max (Bootstrap) to 600V.For its basis, 2 outputs are integrated.Mosfet gate drivers is permissible to operate at a temperature of 125°C.-40°C is the minimum operating temperature.Mosfet gate drivers is recommended that you keep the supply current at 25mA in order to achieve greater stabilMosfet gate driversy.When the supply voltage is 16.6V, it is at its maximum operation.For operation, 10V is the minimum supply voltage.
L6571AD013TR Features
Embedded in the Cut Tape (CT) package
2 drivers
Employing a gate type of IGBT, N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 600V
L6571AD013TR Applications
There are a lot of STMicroelectronics L6571AD013TR gate drivers applications.
- Industrial Power Supplies
- Line drivers
- Multicolor LED/laser displays
- RGB applications
- High current laser/LED systems
- High frequency line drivers
- High-voltage isolated DC-DC converters
- Commercial and agricultural vehicles (CAV)
- Industrial motor drives - compact, standard, premium, servo drives
- Commercial air-conditioning (CAC)
