L6711
| Parameters | |
|---|---|
| Terminal Pitch | 0.5mm |
| Base Part Number | L6711 |
| Function | Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 1.581V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.8V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 95A |
| Voltage - Supply (Vcc/Vdd) | 7.5V~15V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 10.2V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 150kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 178kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Height Seated (Max) | 1.2mm |
| Length | 7mm |
| Width | 7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-TQFP Exposed Pad |
| Number of Pins | 48 |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
L6711 Overview
With its 48-TQFP Exposed Pad package, the switching controller fits the needs of most applications. For outputs of 3, this dc motor controller is suitable. Tube solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 7.5V~15V are the dc control's supply voltage and operating voltage, respectively. Qualified to work in an dc switcher with 0°C~125°C TJ. Switching can be done at 150kHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Phase Control, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at QUAD. Various 48 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. DC switcher's input voltageis set to 12V. Searching "L6711" will return other relevant dc to dc converter ics. There are 48 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. 10.2V should be the minimum input voltage for the dc dc voltage regulator. As determined by the test statistics, the output voltage of DC regulator is 1.581V. A starting point for a project is to note down the dc dc regulator's usual output current, which is 95A. This Surface Mount makes DC switcher suitable for most prototypes and applications. There is a maximum frequency of 178kHz on this dc regulators. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 13.8V.
L6711 Features
Transistor Driver Outputs
Switching Frequency: 150kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
L6711 Applications
There are a lot of STMicroelectronics L6711 DC to DC converter applications.
- Smoke prevention equipment
- Shearing machines
- Thermal power
- Elevator lighting
- Automatic testing equipment
- Terrestrial set-top boxes
- Medical monitoring systems
- Computed tomography (CT)
- Balance equipment
- Cutting machine tools
